Installing Software

Owned by Former user (Deleted)
Last updated: Feb 28, 2023 by Arne Tøn
3 min read

Distribution

 
To get hold of the EXPRESS Data Manager please contact our support center  at:
support@jotne.com
tel : 23171700
 
or visit us at:
Jotne EPM Technology AS
Grenseveien 107
Oslo
Norway 

System requirements

Requirements for installing and running the Express Data Manager  are listed below. Special the EDMserver  needs much memory if it should serve several EDMclients.
 

  • Administration rights on the computer when installing
  • Minimum 2 Gbytes of RAM. 
  • Minimum 1 GBytes of free disk-space


INSTALLING SOFTWARE

 
This section discusses the way in which EXPRESS Data Manager software is distributed. The EXPRESS Data Manager accept the white space character as delimiter between file names in "file name" and "directory name" arguments. Hence, to avoid confusion and possible malfunctions, we recommend avoiding using file and directory names containing the white space character as parameters to EDMsupervisor commands or as arguments to EDMinterface operations. Especially the EDM_HOME configuration parameter should not contain any white space character. The default location is C:\Program files\Jotne\EDMsix.

Setup


Windows

To install the software, execute the edmsix_installer.exe and follow the standard Windows application installation procedure. 

  1. Press Next to start the installation process.



  2. Shows the default location where the installer will place the software, this will also be the EDM_HOME system variable value. Press next to go forward



  3. Here you can see the installation information.



  4. The installer will copy the needed files and add the EDM_HOME variable to you system environment and lastly add firewall rules to the windows firewall



  5. The installation process is finished. If you do not want to add the license key uncheck the "Launch Install License Key" option.



  6. Add the license information and click on "Start installation". This will add the license to the system.



  7. The installation process is finished.


Firewall

If you are using other firewall application than the Windows firewall you have to manually add the correct innbound and outbound rules for the edmserver.exe and edmappserver.exe applications or their ports to the firewall application.


Port number used by EDM

The ports used for EDM depend on the given port number. The edmserver.exe application shall use the given port number and the edmappserver.exe will use the following port numbers .e.g. if you enter port number 9090 than the edmserver.exe will use this port number and the first edmappserver.exe will use port number 9091, the second will use 9092 etc..